Home > Products > Switching Power Supply > DR Series Single Output Industrial DIN Rail Power Supply

DR Series Single Output Industrial DIN Rail Power Supply

45W Single Output Industrial DIN Rail Power Supply (Model: DR-45-5/12/15/24)

Input: 85 ~ 264VAC 120 ~ 370VDC
Modulation System: PWM
MTBF: 364.6K hrs min. MIL-HDBK-217F (25
Safety Standard: En60950
Description:
INQUIRY EMAIL

DR Series Single Output Industrial DIN Rail Power Supply

Features

1. Universal AC input/Full range
2. Protections: Short circuit / Overload / Over voltage
3. Cooling by free air convection
4. Can be installed on DIN rail TS-35/7.5 or 15
5. Isolation class I
6. LED indicator for power on
7. 100% full load burn-in test
8. 2 years warranty

Technical Parameters

MODEL		DR-45-5	DR-45-12	DR-45-15	DR-45-24
OUTPUT	DC VOLTAGE	5V	12V	15V	24V
	RATED CURRENT	5A	3.5A	2.8A	2A
	CURRENT RANGE	0-5A	0-3.5A	0-2.8A	0-2A
	RATED POWER	25W	42W	42W	48W
	RIPPLE & NOISE (max.) Note.2	100mVp-p	200mVp-p	240mVp-p	480mVp-p
	VOLTAGE ADJ. RANGE	4.75-5.5V	10.8-13.2 V	13.5-16.5V	21.6-26.4V
	VOLTAGE TOLERANCE Note.3	±2.0%	±1.0%	±1.0%	±1.0%
	LINE REGULATION	+ 1.0%	+ 1.0%	+ 1.0%	±1.0%
	LOAD REGULATION	+ 1.0%	+ 1.0%	±1.0%	±1.0%
	SETUP, RISE TIME	800ms, 60ms/230VAC at full load
	HOLD UP TIME (Typ.)	60ms/230VAC at full load
INPUT	VOLTAGE RANGE	85 ~ 264VAC 120-370VDC
	FREQUENCY RANGE	47 ~ 63Hz
	EFFICIENCY (Typ.)	72%	77%	77%	80%
	AC CURRENT (Typ.)	1.5A/115VAC 0.75A/230VAC
	INRUSH CURRENT (Typ.)	COLD START 28A/115VAC,56A/230VAC
	LEAKAGE CURRENT	<1mA/240VAC
PROTECTION	OVERLOAD	105 -150% rated output power
		Protection type: Constant current limiting, recovers automatically after fault condition is removed
	OVERVOLTAGE	5.75-6.75V	13.8-16.2V	17.25-20.25V	27.6-32.4V
		Protection type: Shut off o/p voltage, clamping by zener diode
	OVER TEMPERATURE	Tj 135°C typically (U1) detect on heat sink of power transistor
		Protection type: Shut down o/p voltage, re-power on to recover
ENVIRONMENT	WORKING TEMP.	-10 ~ +50°C (Refer to "Derating Curve")
	WORKING HUMIDITY	20 - 90% RH non-condensing
	STORAGE TEMP., HUMIDITY	-20 ~ +85°C, 10 ~ 95% RH
	TEMP. COEFFICIENT	±0.03%/°C (0 ~ 50°C)
	VIBRATION	10 - 500Hz, 2G 10min./1 cycle, period for60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6
SAFETY & EMC (Note 4)	SAFETY STANDARDS	UL508, TUV EN60950-1 approved
	WITHSTAND VOLTAGE	l/P-0/P:1.5KVAC l/P-FG:1.5KVAC 0/P-FG:0.5KVAC
	ISOLATION RESISTANCE	l/P-O/P, l/P-FG, 0/P-FG:100M Ohms / 500VDC / 25"
	EMC EMISSION	Compliance to EN55011.EN55022 (CISPR22), EN61000-3-2.-3
	EMC IMMUNITY	Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61000-6-2 (EN50082-2), heavy industry level, criteria A
OTHERS	MTBF	364.6K hrs min. MIL-HDBK-217F (25"C)
	DIMENSION	937867mm (LWH)
	PACKING	0.31 Kg; 48pcs/17.5Kg/1.3CUFT
NOTE	1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature. 2.Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor. 3.Tolerance : includes set up tolerance, line regulation and load regulation. 4.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.